Body panel nut for use with body and fender screws.

Body and fender panel screw, 6.3x19mm.

Spark plug for all OHV 1100/1200 and CIH 1.5–3.0 with short thread.

Price per piece.

Brake pipe union nut M10x1, length 17 mm, wrench 11 mm.

Price per piece.

Clips for securing door panels. Price per piece.

Plug for securing door and door panels. Price per piece.

Price per piece. For hole diameter 5.5–7mm.

Wheel bolt M12x1.5x47mm for all Opel models from 1953, price per unit.

Universal brake hose retaining clip for Opel models.

Wide reproduction body trim strip, sold per metre, fixed with contact adhesive.

CIH M9 manifold bolt with hex socket head.

Contact points for all Opel models with Bosch ignition system.

Universal exhaust rubber mount compatible with most Opel models.

Original type door pin for all compatible Opel models.

Injector seal ring for Bosch D/L/LE Jetronic, available in 7mm or 9mm.

Clip for sill trim strip.

4-cyl. 58-81, 14mm shaft 6-cyl. Early ones with the small cap (75mm diameter)

Also fits Admiral/Diplomat B with 19mm wheel cylinder.

Non-resistor spark plug for classic Opel models 1953–1965.

Exhaust manifold bolt M9 for CIH engines.

Dust cap for brake bleed nipple. Price per piece.

Sealing ring between ATE brake caliper halves.

12mm fuel hose sold per decimetre. Price per decimetre — select quantity in whole decimetres.

OHV/CIH thermostat for Opel with carburetor engine, 87/88°C.

Rear stabilizer bushing for control arms. 4 pieces required per car.

Clip for wheel arch trim, includes M3 nut.

Available in M7x1 or M8x1.25 thread. Check thread size before ordering.

Price per piece.

Rivet for securing the door stop.

4-speed / 6-cyl, Kap/Adm/Dipl/CIH 5-speed Getrag 240

Rubber buffer for the hood on Rekord and related models.

Rubber buffer for bumper bracket on chrome bumper models.

Coolant temperature sensor for the instrument gauge, from the 1970s onwards.

Rubber gasket for the original metal or chromed oil filler cap.

High-strength hex socket bolt for brake discs, M10x1.25x20mm.

Pilot bearing / needle bearing for CIH 4 and 6 cylinder engines.

Rubber spacer for the hood on classic Opel models.

Original-type door pin kit for 2-door Opel models.

Front brake hose for Opel Ascona/Manta A and Kapitän/Admiral/Diplomat A and B.

Condenser for CIH engines, 1500–2800 cc (except 2.8E).

2-pin connector for BOSCH L/LE-Jetronic and Motronic systems.

Copper brake pipe tubing 3/16, sold per metre.

Reinforced water pump for Opel CIH 4 and 6 cylinder engines, without viscous fan.

Clutch release bearing for Opel models with CIH, OHC and DOHC engines.